Ịrụ CNC ahaziri iche maka braket aluminom

Mmalite

Ịrụ CNC ahaziri iche maka braket aluminom na-eweta akụkụ owuwu ziri ezi nke ukwuu, dị fechaa, ma dịte aka, ahaziri kpọmkwem maka ụkpụrụ ụlọ ọrụ. Dị ka onye nrụpụta CNC ọkachamara, HLW na-elekwasị anya na braket aluminom CNC ahaziri iche nwere ọgwụgwọ elu dị elu, nkenke dị ala, na ogo mmepụta na-agbanwe agbanwe—na-eje ozi ndị na-azụ ahịa n'ụwa niile n'ọhịa ahụike, ụgbọala, robot, eletrọnịkị, nkwukọrịta ekwentị, na ndị ọzọ. Anyị na-ejikọta igwe CNC nwere ọtụtụ axis dị elu, njikwa mma siri ike, na ọrụ ndị na-elekwasị anya na ndị ahịa iji gbanwee imewe CAD gị ka ọ bụrụ braket aluminom dị njikere maka mmepụta nke na-ezute ihe achọrọ maka arụmọrụ, ịdịte aka, na nchikọta.

Gịnị kpatara ịhọrọ braket aluminom e mepụtara site na igwe CNC?

Braketị aluminom pụtara ìhè dị ka nhọrọ kacha mma maka ngwọta nhazi nkwụnye owuwu ahaziri iche, na-ejikọta arụmọrụ, mfe nhazi, na ịdị irè n'iji ego maka ngwa ụlọ ọrụ.

Uru isi ihe

• Ogo ike-na-ibu dị eluNa-enye nkwado owuwu siri ike mgbe ọ na-ebelata ibu ngwaahịa, nke zuru oke maka nchikọta ndị na-emetụta ibu.
• Ịrụ igwe dị ezigbo mfeA na-emepụta ya mfe ka ọ bụrụ nhazi mgbagwoju anya, oghere dị mkpụmkpụ, oghere eriri, na atụmatụ ntinye ziri ezi site na igwe CNC.
• Iguzogide nchara ekeE melitere ya site na ọgwụgwọ elu maka ojiji ogologo oge n'ime ụlọ na n'èzí na gburugburu siri ike.
• Nnwere onwe imeweNa-akwado ụdị ahaziri ahazi, nha dị iche iche, nhazi ịwụnye, na imewe owuwu mgbagwoju anya.
• Ịdịgide adịgideAluminom bụ 100% nke a pụrụ imegharịgharị, na ịkpụ CNC ziri ezi na-ebelata mkpofu ihe maka mmepụta enyi na gburugburu ebe obibi.
• Uru egoIhe eji arụ ọrụ dị ọtụtụ na igwe na-arụ ọrụ nke ọma na-ebelata ụgwọ mmepụta site na ihe nlereanya ruo mmepụta buru ibu.

Ihe mgbochi ndị bụ isi (Ntụaka imewe)

• Aluminiom 6061 nwere ike iguzogide nrụgide dị ala karịa ngwakọta pụrụ iche siri ike, ya mere ọ naghị adabara ọnọdụ ibu owuwu ndị chọrọ arụmọrụ kacha elu.
• Nkwakọba anodized na-agbakwụnye obere ibu, nke na-achọ obere ndozi na nkenke nhazi mgbakọta.
• Okpomọkụ arụmọrụ gbara oke na 150°C (300°F), na-egbochi iji ya n'ime gburugburu ebe okpomọkụ dị oke elu.

Ngwakọta aluminom dị elu maka braket CNC ahaziri iche

HLW na-enye ụdị aluminom atọ kacha elu n'ụlọ ọrụ iji kwekọọ ike, iguzogide nchara, na mkpa gburugburu ebe obibi nke ngwa gị:

1. Ngwakọta aluminom 6061 (Ọkpụrụkpụ ụlọ ọrụ)

Nhọrọ kacha gbanwere agbanwe maka braket aluminom CNC ahaziri iche, na:

• Nchịkọta ihe mejupụtara: 97.91% Al, 0.61% Si, 11% Mg, 0.281% Cr, obere Cu/Fe/Mn/Zn
• Njirimara igwe: ike mgbatị 310MPa, ike mbido 276MPa, mgbatị 12%, ịdị siri ike Brinell 95
• Ọnụ arọ: 2.7 g/cm³ (0.0975 lb/in³)
• Ike isi: Mfe ịrụ igwe, mfe ịgbado, iguzogide nchara, na ịdị ọnụ ala
• Kacha mma maka: braket ụlọ ọrụ n'ozuzu, eletrọniks, ọgwụ, na robọtịks

2. Ngwakọta aluminom 7075 (Ọkwa Ike Dị Elu)

Ike ịdọrọ elu maka ngwa ebe nrụgide dị elu, zuru oke maka ụgbọala ibu arọ, akụrụngwa mmega ahụ, na braket ụgbọelu.

3. Ngwakọta aluminom 5052 (Nchebe megide nchara dị elu)

Arụmọrụ pụrụ iche n'ịgbochi nchara, zuru oke maka braket nkwukọrịta n'èzí, n'ụsọ mmiri, na gburugburu siri ike.

Ikike CNC HLW maka ịrụ braket aluminom

Anyị na-eweta nhazi igwe ziri ezi site n'iji akụrụngwa ọgbara ọhụrụ na njikwa usoro siri ike iji mezuo ụkpụrụ ụlọ ọrụ ụwa niile.

Ọkachamara n'ịrụ ọrụ igwe n'akụkụ ọtụtụ

• Ịkpụ CNC na ịtụgharị-kpụ CNC n'akụkụ atọ, anọ na ise maka nhazi ngwakọta
• Na-akwado nhazi bracket dị mfe ruo nke dị oke mgbagwoju anya (oghere slọt, ntinye eriri, oghere countersink, nhazi oghere ọtụtụ)

Njikwa nkenke siri ike

• Ntụle ọkọlọtọ: ±0.05mm
• Nkenke atụmatụ dị oke mkpa: ruo ±0.01mm
• Nkenke kacha elu: ±0.005 mm maka akụkụ dị oke mkpa

Nkọwa nha na ibu

• Oke kacha nta nke akụkụ: 5×5mm
• Oke nha akụkụ kacha elu: 1000×600×400mm (nha ndị ọzọ buru ibu dị maka ahaziri)
• Arọ kacha elu nke otu akụkụ: 50kg

Mmecha elu ọkachamara maka braket aluminom

HLW na-enye ọgwụgwọ elu zuru oke iji meziwanye ịdịte aka, iguzogide nchara, na mma anya:

• Anodizing (Ụdị II na Ụdị III Hardcoat): nhọrọ doro anya ma ọ bụ agba, mmụba n'ịguzogide iyi na nchebe elu
• Ịkụ bọdụ: Ụdị matte kwekọrọ
• Nkwakọba ntụ ntụ na ịcha agba: nchebe gburugburu ebe obibi siri ike
• Ịkpacha, ịcha, electroplating: mkpuchi ịchọ mma na mgbochi nchara

Nkọwa mmepụta: MOQ, Oge nnyefe & Nkwado faịlụ

Ọnụọgụ iwu

• MOQ: ihe iri abụọ
• Nkwado: prototaipu otu akụkụ ruo mmepụta buru ibu nke karịrị 500

Oge ndu

• Prototaipu: ụbọchị ọrụ 5–7
• Mmepụta buru ibu: ụbọchị ọrụ iri ruo iri na ise
• Nnyefe ụwa niile ọkọlọtọ: izu 2–3 (ọrụ ngwa ngwa maka iwu ndị dị oke mkpa)

Ụdị faịlụ a na-akwado

DWG, PDF, STEP, IGES, STP, SLDPRT, DXF, onyonyo na faịlụ ederede

Nkwupụta ọnụahịa na inye ihe nlele

• Akụkụ ọkọlọtọ: Nye ọnụahịa n'ime awa iri na abụọ
• Akụkụ mgbagwoju anya: Nye ọnụahịa n'ime awa 24 (achọrọ faịlụ 3D)
• A na-enye ihe nlereanya ahaziri iche (a ga-akwụ ụgwọ nlereanya)

Ngwa ụlọ ọrụ sara mbara

Braketsị aluminom ahaziri site na igwe CNC nke HLW na-arụ ọrụ dị mkpa n'ụlọ ọrụ ụwa niile:

• Nlekọta ahụike Ngwaọrụ: nlele onyonyo maka nchọpụta ọrịa, nlekọta ndị ọrịa, ngwaọrụ ọgwụ mgbapụ (dị mma maka ahụ, nke ziri ezi)
• Arụmọrụ dị elu ỤgbọalaỤgbọala asọmpi, akụkụ ụgbọala egwuregwu (ntakịrị ibu, ziri ezi nke ukwuu)
• Ngwaọrụ Ziri Ezi: Akụkụ anya, ngwa ụlọ nyocha, ngwa nnwale (nkwụsi ike nha)
• Robotiki na Akpaka: Ụkwụ robot, manipulators ụlọ ọrụ (ike nhazi owuwu, arụmọrụ dị nro)
• Nkwukọrịta ekwentị: Ntinye antena/efere satịlaịtị (iguzogide nchara n'èzí)
• Mmepụta semikondọkta: ijikwa wafer n'ime ụlọ dị ọcha, itinye akụrụngwa (na-enweghị mmetọ)
• Sistemụ nchekwa ume: Ngwugwu batrị/onye ntụgharị ike na-enye nkwado (ikike ịrụ ọrụ n'ime ụlọ na n'èzí)
• Njikọ eletrọnịkị: ịwụnye na PCB, akpa sensọ, nkwado ngosipụta, akpa ngwaọrụ
• Ụlọ ọrụ mmepụta ihe Ngwaọrụ: Ogwe igwe, panel njikwa, nkwado siri ike
• Ụgbọelu na mbara igwe, HVAC, owuwu na mgbidi n'èzí

Njide mma siri ike na ịgbaso ụkpụrụ

HLW nwere asambodo ISO 9001 (ISO 9001:2015), yana ịgbaso ụkpụrụ maka ụlọ ọrụ ahụike, ụlọ ọrụ ụgbọala, na ụlọ ọrụ ụgbọelu (ISO 13485, IATF 16949, AS9100D, edebanyere aha na ITAR).

• Nnyocha mma zuru oke n'usoro niile maka braket ọ bụla
• Nnwale ziri ezi: CMM, kalipa, maikorọmita, ngwa nyochaa elu, ngwa nyochaa eriri
• Nyocha Ihe Mbụ (FAI) maka ịdị n'otu mmepụta
• Akụkọ ule ihe (MTRs) na nkwado RoHS dị.
• Ngwaọrụ e haziri nke ọma na nhazi mmepụta kwụsie ike na-eme ka a nwee ogo a pụrụ imeghachi.

Usoro mmepụta braket aluminom ahaziri nke HLW

1. Ntinye Faịlụ na NyochaOnye ahịa na-enye faịlụ 2D/3D; ndị injinia HLW na-enyocha ma e nwere ike imepụta ya (e debanyere NDA iji chebe IP)
2. Mmezi DFMAro n'efu maka imewe maka mmepụta iji belata ọnụahịa na oge ndu
3. Ịrụ ọrụ CNC na imecha: Họrọ akụrụngwa nwere ọtụtụ axis ma tinye usoro nhazi elu akọwapụtara
4. Nyocha na MbupuNyocha zuru oke n'akụkụ niile, nkwakọba nchebe iji gbochie mmebi n'oge njem
5. Nnyefe n'ụwa niileJikọọ na DHL/FedEx/UPS; kwado EXW/FOB na nkwụsị ụtụ mbupụ

Ajụjụ a na-ajụkarị (FAQ)

1. Kedu ụdị faịlụ ị na-anabata? DWG, PDF, STEP, IGES, STP, SLDPRT, DXF, onyonyo na faịlụ ederede.
2. Ị bụ onye nrụpụta ma ọ bụ ụlọ ọrụ azụmaahịa? Anyị bụ onye nrụpụta igwe CNC ozugbo, hiwere na 2005.
3. Ị nwere ike inye ọrụ mgbakwunye? Ee, gụnyere ịkpụ tap, itinye ihe nkwụnye eriri, ịkụ ọkụ n'ebe ụfọdụ, na nchikota nta.
4. Ị na-echebe ihe onwunwe ọgụgụ isi? Anyị na-ede nkwekọrịta nzuzo (NDAs) ma na-egbochi ịnweta faịlụ naanị maka ndị ọrụ mmepụta dị mkpa.
5. Ị nwere ike ijikwa mbupu ụwa niile? Ee, anyị na-enye nkwado maka njem mba ụwa na nkwụsị ụtụ mbupụ.

Kpọọ ka e mee ihe

HLW bụ onye mmekọ gị a pụrụ ịtụkwasị obi n'ụwa niile maka Ịrụ CNC ahaziri iche maka braket aluminom, Na-eweta ngwọta ziri ezi, dịte aka, na bara uru site na prototyping ruo mmepụta buru ibu. Ma ịchọrọ braket aluminom 6061 anodized maka eletrọnịkị ma ọ bụ braket aluminom 7075 siri ike maka ngwa ụgbọala, anyị na-emepụta akụkụ ọ bụla kwekọrọ kpọmkwem na nkọwa gị.

Kpọtụrụ anyị taa ka ị nweta ọnụahịa gị ngwa ngwa:

Kpọọ: +86 18664342076

Ozi-e: info@helanwangsf.com

Bupu faịlụ CAD gị maka ọnụahịa ahaziri iche n'ime awa 12 ruo 24!